null
Siser

EasyReflective 9"x12" Heat Transfer Sheet

SKU:
SISR-0912-EWRF-0000
  • EasyReflective 9"x12" Heat Transfer Sheet
  • EasyReflective applied
  • EasyReflective 9"x12" Heat Transfer Sheet - Aqua
  • EasyReflective 9"x12" Heat Transfer Sheet - Dark Grey
  • EasyReflective 9"x12" Heat Transfer Sheet - Rainbow Black
$2.75 - $3.25

Description

EasyReflective™ Heat Transfer Vinyl by Siser

EasyReflective is Siser’s only reflective material with a pressure sensitive backing! This highly reflective heat transfer vinyl is constructed with glass bead technology to illuminate the darkest of conditions. EasyReflective is a truly exceptional polyurethane product due to its pressure sensitive carrier that allows you to re-stick lifting material or replace a piece that’s accidentally removed. With a low application temperature and simple warm peel, EasyReflective can be applied to all kinds of garments and accessories that need to stand out in low lighting. Heat apply EasyReflective with a heat press or home iron for increased visibility on sports garments, pet clothes, or construction crew uniforms.

Cut Settings:

Cricut:

• Blade: Standard
• Setting: Iron-on

Silhouette Cameo:

• Blade: Standard, 3
• Setting: Heat Transfer Material (Smooth)
• Speed: 8
• Thickness: 6

Brother:

• Blade: 2
• Cut Speed: 1
• Cut Pressure: 1

Roland GX-24:

• Blade: 45°
• Force: 80g-90g
• Speed: 25-50 cm/s

Application Instructions:

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm
Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use light/medium pressure for 15 seconds
• Peel carrier warm (at least 15 seconds off press)