Economy Vinyl Laminate 12"x12" Sheet

(4 reviews) Write a Review
SKU:
ORCL-1212-0210-LMNT
  • Economy Vinyl Laminate 12"x12" Sheets
$1.65 $1.49
- You save $0.16

Description

Oraguard 210 Economy Vinyl Laminate

Vinyl laminate is a clear material that is designed to protect whatever it is layered over. Laminates act as a shield against scratching and fading and add an extra layer of protection to any vinyl project. The laminates are primarily used with printed media such as the patterned vinyl and Inkjet Printable vinyl but are compatible with all vinyl. Simply layer the laminate onto the vinyl and smooth out. Then make your cut. Laminates are compatible with all personal hobby and craft cutters but you will need to account for a thicker media when cutting (a test cut is always recommended). The Economy Laminate comes with a matte finish and the Premium Laminate comes with a Gloss finish. Either can be used indoors or outdoors to offer extra protection to your vinyl project.

Features

  • Finish: Matte
  • Adhesive: Solvent-Based, Permanent
  • Thickness: 2.5 mil
  • Minimum Application Temperature: +46F
  • Applied Temperature Resistance: -40F to + 176F
  • Shelf Life: 2 years (at 68F/50% relative humidity)
  • Outdoor Durability: 4+ years
  • Water Resistant (hand wash recommended)
  • Compatible with all craft cutters such as: Cricut, Silhouette, Xyron, Craft ROBO, Graphtec, Quickutz, Inspirations, Pazzles, etc.
  • Available in sizes of 12"x24", 12"x12" and 12"x5 yards

Videos

4 Reviews

  • 4
    [email protected]

    Posted by [email protected] on Nov 16th 2018

    This has a great matte finish. I used it on some stickers I made with the EV printable vinyl. They look store-bought.

  • 5
    economy vinyl laminate

    Posted by Rena Call on Aug 29th 2018

    Love this product. It withstands the abuse my children's water bottles take and I have used it to protect drawings on flat ceramic beads. Excellent product with a variety of uses.

  • 5
    laminate

    Posted by carol purdue on Apr 18th 2018

    Love this laminate! So great yo be able to put laminate film on decal and circuit cuts it and I don't have to cut it by hand, wonderful product!

  • 4
    Need this for print & cut vinyl

    Posted by Tiffany on Feb 21st 2018

    This product is needed to layer on top of your print and cut vinyl 24 hours after printing and before cutting if you intend to do just about anything with it besides planner stickers. I didn't realize this with my first print & cut project but customer service was very helpful in pointing me in the right direction. I wish I had known before placing my first order but once it came in it was easy to work with and did it's job - making the print & cut project ready for layering and protecting. Will definitely use again anytime I'm doing that type of project.