POLISHED METAL VINYL
Metal Films provide you with a unique, high-gloss metalized look. Easily cut and applied, this line of adhesive vinyl has a permanent acrylic adhesive, and can withstand exposure to the elements for up to 5 years. Each color offered provides a rich, yet vibrant display that is certain to turn heads!
Expressions' Polished Metal vinyl is available in an array of colors and 2 different sizes. SHOP NOW!
RECOMMENDED APPLICATIONS:
- Outdoor signage
- Automotive decal
- RV/Marine striping
CUT SETTINGS:
- Cricut Explore:
- Vinyl
- Cricut:
- Speed: High
- Thickness: Medium
- Blade Setting: 3
- Silhouette Cameo:
- Speed: 7
- Thickness: 5
- Blade Setting: 2
HOW TO APPLY:
- Clean your surface- The first thing you will want to do is make sure the surface that you are planning on applying the vinyl to is clean and dry. The smoother your surface the easier it will be to transfer your vinyl onto, but rougher surfaces like wood, textured walls, etc. will still work.
- Cut your design- You can cut your design by hand or use a craft cutter. After your design is all cut, remove the excess vinyl from around your image/lettering (this is called weeding).
- Apply your transfer tape- This is the step that a lot of vinyl beginners are unaware of, and yet probably one of the most important in order to not have a stress meltdown when adhering your vinyl to your surface! Simply place your transfer tape over your vinyl, then take something flat and hard (i.e. credit card, scraper, popsicle stick, etc.) to smooth out any bubbles and to make sure it is securely fastened to the vinyl. Next you will carefully pull off the backing paper from the vinyl being careful to make sure that the vinyl has transferred to your tape.
- Adhere design to new surface- With your surface prepared (step 1) you are ready to align your image. Carefully position it onto your project; once you have it in place, firmly press down and use your scraper to smooth out any bubbles. Always make sure to start from the center and work out towards the edges, this will press out any bubbles instead of pushing them in. Once you have your vinyl securely adhered to your surface, take one corner of your transfer tape and slowly pull downwards at an angle. Run your scraper (credit card, etc.) over the vinyl once applied to get out any remaining bubbles and help secure it to the surface.
Instructional video coming soon!