EV Puff 9"x12" Heat Transfer Sheet

EV Puff Heat Transfer Vinyl by Expressions Vinyl

As the name implies, EV Puff is a unique HTV that “puffs” up from the garment when heat applied, transforming designs into a textured 3D look.
Note: EV Puff is designed to withstand only one heat application. Repeated applications will “flatten” the puff effect permanently. It is recommended to apply EV Puff last when used with other materials.

Features:

• Application: Preheat 3 seconds - Apply MED-FIRM pressure at 280°F for 8-10 seconds
• Peel: Warm
• Layering: Top Layer Only
• Adheres to: 100% Cotton, 100% Polyester, Cotton/Poly Blends
• Finish: Matte
• Thickness: 200 mircrons / 7.87 Mils
• Recommended Wash Instructions: Wait 24hrs before 1st wash - Machine wash warm/cold - Tumble dry on normal setting - Do not bleach or dry clean - Wash inside out
• Compatible with all craft cutters such as: Cricut, Silhouette, Xyron, Craft ROBO, Graphtec, Quickutz, Inspirations, Pazzles, etc.
• Available in 9"x12" sheets ***All sizes are +/- 0.25"***

Tips & Tricks

• Use a stronger grip cutting mat or you may need to attach to mat with tape.
• Frosted carrier side down to cut. Shiny side (adhesive side) face up.
• Do not repress, will loose “puff” if pressed additional times.
• As with any vinyl, ALWAYS do a test cut first to make sure your settings are on point.