How to use EV Puff Vinyl

You made an AWESOME choice picking up some of our new EV Puff vinyl! But since it is so special and new, we wanted to make sure you had the very best first impression. Therefore, we wanted to take a minute and share with you our tested settings and tips so that you won’t have to waste any of this fun vinyl on trial and error. 

Recommended Cut Settings: 

• Silhouette Cameo (all models): Blade - 2 | Speed - 7 | Force - 5 

• Cricut Explore: Vinyl 

• Cricut Maker: Category – Vinyl | Setting – Vinyl | Pressure – Default 

Product Specs

• Applies to: 100% Cotton, 100% Polyester, Cotton/Poly Blends

• Thickness: 200 Microns/7.87 Mils 

Regular Puff Application:

• Application Temperature: 280°F / 138°C 

• Time: 8-10 Seconds 

• Pressure: Med-Firm 

• Peel: Warm


  •  Application Temperature: 280°F / 138°C
  • Time: 8-10 Seconds - Remove Carrier Sheet - press additional 8-10 seconds
  • Pressure: Medium
  • Peel: HOT

  • Tips & Tricks

    • Use a stronger grip cutting mat or you may need to attach to mat with tape.

    • Frosted carrier side down to cut. Shiny side (adhesive side) face up 

    • Wait 24 hours before first wash. Machine wash warm or cold on gentle cycle. Use mild detergent. Wash inside out. Do not use bleach or dry clean. Tumble dry on normal setting 

    • As with any vinyl, ALWAYS do a test cut first to make sure your settings are on point 

    This is such a fun new product, and we are sure you’re going to fall in love with it too! If you have any further questions or concerns, please feel free to reach out to our Customer Service team:

    Feb 1st 2024 Expressions Vinyl - Team

    Recent Posts