
Siser Brick 600 is a 600 micron thick, flexible heat transfer vinyl that’s designed for smaller logos and designs to add extra dimension to your garments. Brick 600’s semi-gloss finish looks great on caps, bags, and is ideal for left chest logos.
Brick is CPSIA Certified, so it’s perfect for decorating children’s clothing and accessories.
Iron: • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier hot or cold |
Heat Press: • Cut in reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use light/medium pressure for 10-15 seconds • Peel carrier hot or cold |
Cricut: • Blade: Standard |
Silhouette Cameo: • Blade: Standard, 10 |
Brother: • Blade: 2 |
Roland GX-24: • Blade: 45° |